Resources, Tools and Basic Information for Engineering and Design of Technical Applications!

mobile - visible on handheld devices - alternatively go to www.engineeringtoolbox.com!

Engineering ToolBox > JIS - Pipe, Tube and Fittings Standards

Japanese industrial pipe, tube and fittings standards and specifications from JAS - the Japanese Standards Association

Industrial pipe, tube and fittings standards and specifications from Japanese Standards Association - JAS:

A. Civil Engineering and Architecture

• JIS A 5302
  Concrete pipes and reinforced concrete pipes
• JIS A 5303
  Reinforced spun and centrifugal reinforced concrete pipes
• JIS A 5314:1998
  Mortar lining for ductile iron pipes
• JIS A 5322
  Reinforced spun concrete pipes with socket
• JIS A 5333:1993
  Core type prestressed concrete pipes
• JIS A 5350:1991
  Fiberglass reinforced plastic mortar pipes
• JIS A 5405:1982
  Asbestos cement pipes

B. Mechanical Engineering

• JIS B 0151:2001
  Iron and steel pipe fittings -- Vocabulary
• JIS B 2301:2004
  Screwed type malleable cast iron pipe fittings
• JIS B 2302:1998
  Screwed type steel pipe fittings
• JIS B 2303:1995
  Screwed drainage fittings
• JIS B 2311:1997
  Steel butt-welding pipe fittings for ordinary use
• JIS B 2312:1997
  Steel butt-welding pipe fittings
• JIS B 2313:1997
  Steel plate butt-welding pipe fittings
• JIS B 2316:1997
  Steel socket-welding pipe fittings
• JIS B 2321:1995
  Aluminium and aluminium alloy butt-welding pipe fittings
• JIS B 2351:1990
  25 MPa (25 kgf/cm²) bite type tube fittings for hydraulic use
• JIS B 2354:1991
  Crosslinked polyethylene (XPE) pipe clamp type fittings
• JIS B 6164:1996
  Compression type tube fittings for machine tools
• JIS B 8381:1995
  Pneumatic system -- Flexible tubes -- Tube fittings
• JIS B 8602:2002
  Pipe flanges for refrigerants
• JIS B 8607:2002
  Flare type and brazing type fittings for refrigerants

C. Electronic and Electrical Engineering

• JIS C 8380:1993
  Plastic coated steel pipes for cable-ways

D. Automotive Engineering

• JIS D 3607:1993
  Automotive diesel engines - steel tubes for high-pressure fuel injection pipes

E. Railway Engineering

• JIS E 4106:1994
  Railway rolling stock - screwed type pipe fittings
• JIS E 4308:1994
  Railway rolling stock - air filters

F. Shipbuilding

• JIS F 0014:2000
  Glossary of terms for shipbuilding (hull part -piping)
• JIS F 0301:1990
  Schemes of thermal insulation of piping for small ships
• JIS F 0414:1996
  Shipbuilding - internal wirings and pipings of engine control console
• JIS F 0506:1996
  Shipbuilding - applications of copper pipes
• JIS F 0507:1992
  Small ships - steel pipes - application
• JIS F 2007:1976
  Mooring pipes
• JIS F 2030:1978
  Single point mooring pipes
• JIS F 3016:1996
  Shipbuilding - cast iron pipe sleeve type expansion joints
• JIS F 3017:1996
  Shipbuilding - cast steel pipe sleeve type expansion joints
• JIS F 3993:1996
  Discharge pipes for dredger
• JIS F 3994:1996
  Floaters of discharge pipes for dredger
• JIS F 3995:1991
  Rubber sleeves for dredge discharge pipes
• JIS F 7008:1996
  Standard specification of thermal insulation for piping
• JIS F 7101:1993
  Pipes of ship's machinery - standard velocity of flow
• JIS F 7102:1989
  Application for gaskets and packings to piping system in machinery space
• JIS F 7435:1996
  Shipbuilding - brass 30K unions with bite joints
• JIS F 7436:1996
  Shipbuilding - copper tube 10K brazed unions
• JIS F 7437:1996
  Shipbuilding - copper tube 10K screwed unions
• JIS F 7438:1996
  Shipbuilding - steel pipe 10K welding type unions
• JIS F 7439:1996
  Shipbuilding - steel pipe 10K screwed unions
• JIS F 7440:1996
  Shipbuilding - copper pipe 20K brazed type unions
• JIS F 7441:1996
  Shipbuilding - copper pipe 20K screwed unions
• JIS F 7442:1996
  Shipbuilding - steel pipe 40K welded unions
• JIS F 7443:1996
  Shipbuilding - steel pipe 40K screwed unions
• JIS F 7444:1996
  Shipbuilding - steel pipe 100K welded unions
• JIS F 7445:1996
  Shipbuilding - steel pipe 100K screwed unions

G. Ferrous Materials and Metallurgy

• JIS G 3429:1988
  Seamless steel tubes for high pressure gas cylinder
• JIS G 3439
  Seamless steel oil well casing, tubing and drill pipe
• JIS G 3441:2004
  Alloy steel tubes for machine purposes
• JIS G 3442:2004
  Galvanized steel pipes for ordinary piping
• JIS G 3443:2004
  Coated steel pipes for water service
• JIS G 3444:2004
  Carbon steel tubes for general structural purposes
• JIS G 3445:1988
  Carbon steel tubes for machine structural purposes
• JIS G 3446:1994
  Stainless steel pipes for machine and structural purposes
• JIS G 3447:2004
  Stainless steel sanitary pipes
• JIS G 3448:2004
  Light gauge stainless steel tubes for ordinary piping
• JIS G 3451:1987
  Fittings of coated steel pipes for water service
• JIS G 3452:2004
  Carbon steel pipes for ordinary piping
• JIS G 3454:1988
  Carbon steel pipes for pressure service
• JIS G 3455:1988
  Carbon steel pipes for high pressure service
• JIS G 3456:2004
  Carbon steel pipes for high temperature service
• JIS G 3457:1988
  Arc welded carbon steel pipes
• JIS G 3458:1988
  Alloy steel pipes
• JIS G 3459:2004
  Stainless steel pipes
• JIS G 3460:1988
  Steel pipes for low temperature service
• JIS G 3465:1988
  Seamless steel tubes for drilling
• JIS G 3466:1988
  Carbon steel square pipes for general structural purposes
• JIS G 3468, Publication date:2004-03-20
  Large diameter welded stainless steel pipes
• JIS G 3469:2002
  Polyethylene coated steel pipes
• JIS G 3471:1977
  Corrugated steel pipes and sections
• JIS G 3474:1995
  High tensile strength steel tubes for tower structural purposes
• JIS G 3491:2004
  Asphalt protective coatings for steel water pipe
• JIS G 3492:1993
  Coal-tar enamel protective coatings for steel water pipe
• JIS G 4903:1991
  Seamless nickel-chromium-iron alloy pipes
• JIS G 5201:1991
  Centrifugally cast steel pipes for welded structure
• JIS G 5202:1991
  Centrifugally cast steel pipes for high temperature and high pressure service
• JIS G 5525:2000
  Cast-iron drainage pipes and fittings
• JIS G 5526:1998
  Ductile iron pipes
• JIS G 5527:1998
  Ductile iron fittings
• JIS G 5528:1984
  Epoxy-powder coating for interior of ductile iron pipes and fittings

H. Non-ferrous Metals and Metallurgy

• JIS H 0502:1986
  Method of eddy current testing for copper and copper alloy pipes and tubes
• JIS H 0515:1992
  Eddy current inspection of titanium pipes and tubes
• JIS H 0516:1992
  Ultrasonic inspection of titanium pipes and tubes
• JIS H 3300:1997
  Copper and copper alloy seamless pipes and tubes
• JIS H 3320:1992
  Copper and copper alloy welded pipes and tubes
• JIS H 3401:2001
  Pipe fittings of copper and copper alloys
• JIS H 4080:1999
  Aluminum and aluminium alloys extruded tubes and cold-drawn tubes
• JIS H 4090:1990
  Aluminum and aluminium alloy welded pipes and tubes
• JIS H 4202:1998
  Magnesium alloy seamless pipes and tubes
• JIS H 4311:1993
  Lead and lead alloy tubes for common industries
• JIS H 4312:2000
  Polyethylene lining lead pipes for water supply
• JIS H 4552:2000
  Nickel and nickel alloy seamless pipes and tubes
• JIS H 4630:2001
  Titanium and titanium alloy seamless pipes
• JIS H 4635:2001
  Titanium and titanium alloy welded pipes

K. Chemical Engineering

• JIS K 6739:2004
  Unplasticized poly(vinyl chloride) (PVC-U) pipe fittings for drain
• JIS K 6741:2004
  Unplasticized poly(vinyl chloride) (PVC-U) pipes
• JIS K 6742:2004
  Unplasticized poly(vinyl chloride) (PVC-U) pipes for water supply
• JIS K 6761:2004
  Polyethylene pipes for General Purposes
• JIS K 6762:2004
  Double wall polyethylene pipes for water supply
• JIS K 6743:2004
  Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply
• JIS K 6769:2004
  Crosslinked polyethylene (PE-X) pipes
• JIS K 6770:2004
  Crosslinked polyethylene (PE-X) pipe fittings
• JIS K 6774:1998
  Polyethylene pipes for the supply of gaseous fuels
• JIS K 6775-1:1998
  Polyethylene pipe-fittings for the supply of gaseous fuels --
  Part 1: Heatfusion fittings
• JIS K 6775-2:1998
  Polyethylene pipe-fittings for the supply of gaseous fuels --
  Part 2: Spigot fittings
• JIS K 6775-3:1998
  Polyethylene pipe-fittings for the supply of gaseous fuels --
  Part 3: Electrofusion fittings
• JIS K 6776:2004
  Chlorinated poly(vinyl chloride) (PVC-C) pipes for hot and cold water supply
• JIS K 6777:2004
  Chlorinated poly(vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply
• JIS K 6778:2004
  Polybutene (PB) pipes
• JIS K 6779:2004
  Polybutene (PB) pipe fittings
• JIS K 6897:1995
  Polyetrafluoroethylene pipes

P. Pulp and Paper

• JIS R 1201:1991
  Clay pipes
• JIS R 1511:1991
  Conical flanged straight pipes of acid proof porcelains for chemical industry
• JIS R 1512:1991
  Conical flanged 90 degrees bent pipes of acid proof porcelains for chemical industry
• JIS R 1513:1991
  Conical flanged 45 degrees bent pipes of acid proof porcelains for chemical industry
• JIS R 1514:1991
  Conical flanged tee pipes pipes of acid proof porcelains for chemical industry
• JIS R 1534:1991
  Metal joint for conical flanged pipes of acid proof porcelains for chemical industry

S. Domestic Wares

• JIS S 2080:1994
  Exhaust pipes for burning appliances
• JIS S 3028:1994
  Oil discharge copper pipe for oil burning appliances

T. Medical Equipment and Safety Appliances

• JIS T 7101:1993
  Medical gas pipeline systems
• JIS T 9211:1990
  Pipes for endoskeletal type of lower limb prostheses

Z. Miscellaneous, Packaging, Welding, Radioactivity, etc.

• JIS Z 1604:1995
  Plugs and flanges for steel drums